Guayule natural rubber composites: impact of fillers on their cure characteristics,dynamic and mechanical behavior

Guayule natural rubber (GNR) is an alternative resource of Hevea natural rubber (HNR) with 99.9% cis content in its 1,4-polyisoprene chemical backbone. In this study, compounds were formulated independently with four different reinforcing fillers such as carbon black (HAF), precipitated silica (VN3), fume silica (FUM) and nanofly ash (NFA) for the advancement of GNR based products. The cure characteristic, dynamic-mechanical performance and mechanical properties of GNR composite were studied with the reinforcing effect of different fillers on GNR. The cure characteristic results demonstrated that HAF and FUM silica filled compounds had more processing safety than VN3 and NFA filled compounds. Viscoelastic parameters of the vulcanizates were studied by dynamic mechanical analysis to estimate the glass transition characteristics and dynamic behavior. The higher storage modulus of FUM silica vulcanizate was an indication of superior filler reinforcing nature and improved rolling resistance than other filled systems. Additionally, HRTEM analysis also proved the better filler dispersion ability of FUM silica in GNR matrix. The mechanical properties were studied with a variation of each filler loading of 8, 16, and 32 phr in GNR vulcanizates. The tensile strength of each filled system increased with an increase of filler content from 8 to 32 phr. In comparison, FUM silica GNR vulcanizates exhibited better mechanical properties, therefore, it was considered as a better structure-performance composite than those of HAF, VN3 and NFA filled composites.

     

Real-Time Ultrasonic Monitoring of the Vulcanization Process in Nitrile Rubbers

Russian Journal of Nondestructive Testing - Nitrile rubbers, also known as Nitrile-Butadiene rubbers, belong to the category of synthetic rubbers and are a better choice as materials for...     

A complete review based on various aspects of pulverized coal combustion

Coal is the most abundant energy source, and around 40% of the world's electricity is produced by coal combustion. The emission generated through it put a constraint on power production by coal combustion. There is a need to reduce the emissions generated through it to utilize the enormous energy of coal for power production. Detailed understanding of various aspects of coal combustion is required to reduce the emissions from coal‐fired furnaces. The aim of present paper is to review various aspects of pulverized coal combustion such as oxy‐fuel combustion, co‐combustion of coal and biomass, emissions from pulverized coal furnaces, ash formation and deposition, and carbon capture and sequestration (CCS) technologies to outline the progress made in these aspects. Both experimental and numerical aspects are included in this review. This review also discusses the thermodynamic aspects of the combustion process. Furthermore, the effect of various submodels such as devolatilization models, char combustion models, radiation models, and turbulent models on the process of pulverized coal combustion has been investigated in this paper.     

A study on remanufacturing possibility of a product

With the intensification of Globalization, customers’ environment-friendly attitude and stringent environmental regulations, the manufacturers have been orienting their manufacturing and other value additive processes towards the development of more environment-friendly products and use of relevant processes including taking back of used products after their end-of-use or end-of-life from the end users. Remanufacturing is one of the prominent and popular options. Remanufacturing perhaps has drawn maximum attention because of its economic viability and environmental cleanliness. The remanufacturing operation depends upon the quality and quantity of the used. Better the quality lesser the remanufacturing cost. A remanufacturer is unaware about the condition of used product before its acquisition. It may also be noted that the remanufactured product may be taken after a period of its use by users. So it is really difficult to judge how many cycles does the product go for remanufacturing. This has drawn the attention of the authors and the problem is studied with developing some mechanism on the possible frequency of the remanufacturing of a new product. This paper is a study report on this area of research which is expected to contribute immensely to the remanufacturing business.

     

Plasmon‐Induced Hot Carrier Separation across Dual Interface in Gold–Nickel Phosphide Heterojunction for Photocatalytic Water Splitting

Precise control of the topology of metal nanocrystals and appropriate modulation of the metal–semiconductor heterostructure is an important way to understand the relationship between structure and material properties for plasmon‐induced solar‐to‐chemical energy conversion. Here, a bottom‐up wet chemical approach to synthesize Au/Ni₂P heterostructures via Pt‐catalyzed quasi‐epitaxial overgrowth of Ni on Au nanorods (NR) is presented. The structural motif of the Ni₂P is controlled using the aspect ratio of the Au NR and the effective micelle concentration of the C₁₆TAB capping agent. Highly ordered Au/Pt/Ni₂P nanostructures are employed as the photoelectrocatalytic anode system for water splitting. Electrochemical and ultrafast absorption spectroscopy characterization indicates that the structural motif of the Ni₂P (controlled by the outer‐shell deposition of Ni) helps to manipulate hot electron transfer during surface plasmon decay. With optimized Ni₂P thickness, Pt‐tipped Au NR with an aspect ratio of 5.2 exhibits a geometric current density of 10 mA cm^?2 with an overpotential of 140 mV. The photoanode displays unprecedented long‐term stability with continuous chronoamperometric performance of 50 h at an input potential of 1.5 V with over 30 days. This work provides definitive guidance for designing plasmonic–catalytic nanomaterials for enhanced solar‐to‐chemical energy conversion.     

Transition‐Metal Dichalcogenide NiTe2: An Ambient‐Stable Material for Catalysis and Nanoelectronics

By means of theory and experiments, the application capability of nickel ditelluride (NiTe₂) transition‐metal dichalcogenide in catalysis and nanoelectronics is assessed. The Te surface termination forms a TeO₂ skin in an oxygen environment. In ambient atmosphere, passivation is achieved in less than 30 min with the TeO₂ skin having a thickness of about 7 Å. NiTe₂ shows outstanding tolerance to CO exposure and stability in water environment, with subsequent good performance in both hydrogen and oxygen evolution reactions. NiTe₂‐based devices consistently demonstrate superb ambient stability over a timescale as long as one month. Specifically, NiTe₂ has been implemented in a device that exhibits both superior performance and environmental stability at frequencies above 40 GHz, with possible applications as a receiver beyond the cutoff frequency of a nanotransistor.     

Vortex Matter in Highly Strained Nb$$_{}$$Zr$$_{25}$$25: Analogy with Viscous Flow of Disordered Solids

We present the results of magnetization and magneto-transport measurements in the superconducting state of an as-cast Nb\(_{75}\)Zr\(_{25}\) alloy. We also report the microstructure of our sample at various length scales by using optical, scanning electron and transmission electron microscopies. The information of microstructure is used to understand the flux pinning properties in the superconducting state within the framework of collective pinning. The magneto-transport measurements show a non-Arrhenius behaviour of the temperature- and field-dependent resistivity across the resistive transition and is understood in terms of a model for viscous flow of disordered solids which is popularly known as the ‘shoving model’. The activation energy for flux flow is assumed to be mainly the elastic energy stored in the flux-line lattice. The scaling of pinning force density indicates the presence of two pinning mechanisms of different origins. The elastic constants of the flux-line lattice are used to estimate the length scale of vortex lattice movement, or the volume displaced by the flux-line lattice. It appears that the vortex lattice displacement estimated from elastic energy considerations is of the same order of magnitude as that of the flux bundle hopping length during flux flow. Our results could provide possible directions for establishing a framework where vortex matter and glass-forming liquids or amorphous solids can be treated in a similar manner for understanding the phenomenon of viscous flow in disordered solids or more generally the pinning and depinning properties of elastic manifolds in random media. It is likely that the vortex molasses scenario is more suited to explain the vortex dynamics in conventional low-T\(_C\) superconductors.